Everbilt 1/2 HP Submersible Aluminum Sump Pump with Tethered Switch

The Everbilt 1/2 HP Submersible Sump Pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a tethered float switch requiring an 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection.

1-1/2 in. FNPT discharge
Semi-open thermoplastic impeller passes 3/8 in. solids
Submersible for quiet operation
Aluminum motor housing for efficient motor cooling
Continuous duty, efficient 115-Volt PSC motor for lower carbon footprint; higher efficiency using less energy to operate
8.25 ft. cord length
Pumps up to 2400 GPH at 10 ft., outperforms the competition

Discharge Flow @ 10 ft. (gallons/hour): 2400
Maximum Working Temperature (F): 100
Product Weight (lb.): 8.82 lb
Cord Length (ft.): 8.25
Impeller Material: Plastic
Pump Switch Type: Tethered
Features: Bottom/End Suction,Non-Clogging,Self-Priming,Solids Handling,Submersible,Thermal Overload Protection
Minimum working temperature (F): 35
Maximum Horsepower (hp): .5
Discharge Flow @ 0 ft. (gallons/hour): 2800
Amperage (amps): 5.2 A
Power Type Required: AC
Housing Material: Aluminum
Voltage: 115v
Discharge Flow @ 15 ft. (gallons/hour): 2100
Sump Pump Outlet Diameter Type: 1-1/2 FPT
Certifications and Listings: CSA Certified


Product Depth (in.): 6.3 in
Switch-On Height (in.): 11.81
Product Height (in.): 10.63 in
Switch-Off Height (in.): 3.94
Product Width (in.): 8.27 in
Maximum Pumping Height (ft.): 24